SECUPLUS RIPPER 210 #210001
Split paper without a blade – in single layers.
The SECUPLUS RIPPEX 210 is ideal for processing roll material. Thanks to a stable edge on the top, it is able to split individual layers of paper from the roll. Since there is no blade, cutting injuries are impossible. And material shrinkage is also kept within limits. Because the ergonomic SECUPLUS RIPPEX 210 can not only be inserted precisely into the selected layer. It also glides over the surface without leaving any marks.
Product features
Technical features
-
Spezial safety
-
Bladeless
-
Ergonomic
-
For right and left handers
-
Lanyard hole
Main cutting materials
-
Layers of foil or paper
-
Slabbing material off a roll
Accessories
-
TOOL RETRACTOR NO. 9960
Service
-
Technical data sheet
-
Consulting service
DO YOU HAVE FURTHER QUESTIONS?
CONTACT FORMAll highlights at a glance.
Bladeless
The SECUPLUS RIPPEX 210 made of plastic works without a blade. There is no sharp cutting edge on which you could injure yourself. This special protection considerably increases your safety at work.
Bevelled edge
The top edge is shaped exactly so that you can use it to rip paper layers. Condition: The paper is under tension. The curved knife nose paves the way into the roll.
Smooth contact surface
The underside of the SECUPLUS RIPPEX 210 is completely smooth and straight. So you don't lose speed in the roll. You can glide through comfortably – while the splitting work is done further up.
Ergonomic handle
You move the paper splitter forward by pushing. It is very pleasant that the rear part of the tool is rounded. This avoids pressure points and other discomfort.
SAFE AND EFFICIENT USAGE.
SAFETY TECHNOLOGY
BLADELESS
The tool does its work without a blade. There is no cutting edge on which you can injure yourself. This special protection eliminates the possibility of cutting accidents.
Usage
YOUR CUTTING TOOL IN DETAIL.
| Order number | 210001.13 |
| Packaging unit | 20 in box (loose) |
| Measurements (L x W x H) | 213 x 9 x 75 mm |
| Weight product | 50 g |
| Cutting depth | 1.9 mm |
| Basic material | Plastic |
THE RIGHT ACCESSORIES.
MANUAL
 MARTOR SECUPLUS RIPPEX 210 Manual |
0.18 MB |
FACTSHEETS
 MARTOR SECUPLUS RIPPEX 210 Factsheet GB |
2.04 MB |
BROCHURES
| MARTOR SECUPLUS RIPPEX 210 210001 Brochure GB |
0.80 MB |
TECHNICAL DATA SHEET
| MARTOR SECUPLUS RIPPEX 210 210001 Data Sheet GB |
0.53 MB |